Tag: Non woven interlining

You are placing an interlining order and the supplier asks — woven or non-woven?

If your answer depends on habit rather than a clear understanding of what each one does, you are not alone. Most garment manufacturers learn the difference between woven interlining and non woven interlining through production mistakes — a sherwani front that loses its shape, a collar that feels too stiff, a blazer lapel that curls within a week.

Most manufacturers figure this out the hard way — through a production batch that does not hold its shape, or a collar that comes back stiff from the tailor. This blog skips that part and gives you the clear answer upfront, helping you choose the right woven interlining or non woven interlining for every garment application.

Table of Contents

• How Each One Is Made — The Fundamental Difference
• How They Perform — Strength, Drape, and Stability
• Full Spec Comparison — Verified From the Product
• Which Garment Parts Need Which Type
• Making the Final Call for Your Production

How Each One Is Made — The Fundamental Difference 

The difference between woven and non woven interlining starts at the manufacturing stage — before any adhesive is applied, before any fusing happens. It starts with how the base fabric itself is constructed.

How woven interlining is made

Woven interlining is made exactly like any other woven fabric. Threads run in two directions — warp (lengthwise) and weft (crosswise) — interlocked in a precise pattern on a loom. That interlocking structure is what gives woven interlining its defining properties: a grain direction, dimensional stability, and tensile strength that comes from the thread construction itself.

The material is 100% polyester. The result is a fabric that behaves like a textile — it has a face and a back, it has a grain that you can feel when you pull it, and it responds to stress the way a woven fabric should. It resists stretching along the grain and holds its position after fusing, through tailoring, through wear, and through repeated dry cleaning.

How non-woven interlining is made

Non woven fusible interlining is made without weaving. Instead, polyester fibres — pure or blended — are laid out and bonded together through thermal bonding, chemical bonding, or mechanical bonding. There are no threads. There is no interlocking structure. The fibres are simply held together in a flat sheet.

The result is a fabric with no grain direction. Pull it in any direction and it responds the same way — soft, slightly flexible, uniform. This is what makes it feel different from woven in your hands, and what makes it behave so differently inside a garment.

The adhesive coating — how both become fusible

Both types carry a heat-activated adhesive on one side — this is what makes them fusible. When you place either type of adhesive-side down on the wrong side of your outer fabric and apply heat and pressure, the adhesive melts and bonds the interlining permanently to the fabric.

The coating type differs:

• Woven interlining uses PA (Polyamide) double-dot coating — faster fusing, stronger bond, suited to heavy production
• Non woven interlining fabric uses PES (Polyester) paste dot and double dot coating — effective for lighter applications, softer bond

Both are OEKO-TEX Standard 100 certified. Both bond with heat under a fusing press. But the base fabric construction underneath determines everything about how they perform once fused.

How They Perform — Strength, Drape, and Stability 

This is where the real difference shows up — not on the roll, but inside the finished garment.

Dimensional stability

Woven interlining maintains its shape after fusing because its interlocked threads resist stretching and distortion. Non-woven interlining is more flexible and stretches slightly in all directions, making it suitable for smaller garment parts but less effective for structured panels.

Strength and tear resistance

Woven interlining offers superior tear resistance, as its woven structure distributes stress evenly. Non-woven interlining is less resistant to concentrated stress, which is acceptable for collars and cuffs but not ideal for large structural areas.

Drape and hand feel after fusing

Woven interlining creates a firmer, more structured feel that helps garments hold their shape. Non-woven interlining produces a softer, more flexible drape that moves naturally with the body.

Elasticity

Non-woven interlining provides greater stretch and flexibility, making it comfortable for garment parts that require movement. Woven interlining has minimal elasticity, helping tailored garments maintain their intended structure.

Wash and dry clean stability

Both interlinings perform well during washing and dry cleaning. Woven interlining retains its structure through repeated cleaning cycles, while non-woven interlining remains dimensionally stable and reliable for regularly washed garments such as shirts.

Performance summary:

Full Spec Comparison — Verified From the Product 

Here are the confirmed specifications for both Double Ghoda products — so you know exactly what you are ordering and what to expect on the production floor.

Woven Fusible Interlining:

Non-Woven Fusible Interlining:

Four spec differences that matter most for production:

GSM ceiling is very different Woven goes from 22 GSM to 150 GSM — the full range from light collar interlining to heavy sherwani body fusing. Non-woven tops out at 82 GSM. If your garment needs 100 GSM or above — and most Indian ethnic formal wear does — non-woven is simply not an option.

Width affects your cutting efficiency Woven at 150 cm gives you significantly more usable width per metre when cutting large panels — suit fronts, sherwani bodies, full front fuse for blazers. Non woven interlining at 100 cm is well matched to the smaller parts it is designed for — collars, cuffs, plackets — where a narrower width is not a constraint.

Fusing parameters are different — confirm before you run production The temperature, pressure, and dwell time for each type are different. Running non-woven at woven parameters — or vice versa — causes poor bonding, fabric distortion, or surface damage. Always confirm which product you are fusing and use the correct parameters for that specific type. Roll length differs Woven comes in 50-metre rolls. Non-woven comes in 100-yard (approximately 91-metre) rolls. Plan your cutting schedules and order quantities around these roll lengths — they affect how you plan your cutting room and how often you change rolls on the production line.

Which Garment Parts Need Which Type

This is the decision that production quality actually depends on. Here is the clear breakdown by garment part:

Use Woven Interlining For:

• Safari suits and structured Indo-Western jackets (80–100 GSM): Delivers the right balance of support and drape for tailored silhouettes.
• Sherwani and achkan fronts (120–150 GSM): Provides the strength and stability needed to support heavy fabrics and maintain shape throughout wear.
• Bandhgala and Nehru jacket chest panels and lapels (100–140 GSM): Ensures a clean front fall and helps lapels retain their structure.
• Formal blazers and suit jackets (80–130 GSM): Ideal for chest pieces, front panels, and lapels where shape retention is essential.

Use Non-Woven Interlining For:

• Pockets, facings, and waistbands: A cost-effective solution for reinforcing smaller garment components.
• Shirt collars and collar stands (45–65 GSM): Adds crispness while remaining comfortable and flexible.
• Shirt cuffs (45–60 GSM): Provides shape and buttonhole support without restricting movement.
• Shirt plackets (30–45 GSM): Offers light reinforcement to keep the button line neat and flat.
• Women’s wear and lightweight structured garments: Maintains softness, drape, and comfort while adding gentle support.

The rule that covers most decisions:

If the garment part needs to hold a defined shape through extended wear against a heavy outer fabric — woven. If it needs light reinforcement with softness and flexibility — non-woven.

Making the Final Call for Your Production

By now you have the information to make the right call for each part of every garment in your production. But here are a few practical points that experienced buyers factor in before placing an order:

Most production units need both types of interlining

If you are making structured garments such as sherwanis, bandhgalas, and blazers typically require woven interlining, while collars, cuffs, plackets, and smaller garment components perform best with non-woven interlining. The two are complementary, not interchangeable.

Test before ordering in bulk — for both types

Fusing results can vary depending on the fabric, machine settings, and production environment. Test a sample first to evaluate bond strength, appearance, and drape before approving a full production run.

GSM matching is as important as type selection

Choosing the correct GSM is critical. Lighter GSMs are ideal for soft reinforcement, while heavier GSMs provide greater structure and support. An incorrect GSM can affect garment comfort, appearance, and durability, regardless of whether you choose woven or non-woven.

Sourcing both from one supplier simplifies everything

Procuring both woven and non-woven interlining fabric from a single supplier helps maintain consistency, simplifies inventory management, and reduces quality variations across production batches.

Our non woven interlining fabric starts from 30 GSM for the lightest applications and goes up to 82 GSM for medium structured garments. Our woven fusible interlining covers 22–150 GSM for the full range of Indian garment manufacturing requirements.

We supply both woven and non-woven fusible interlining in bulk across India — woven from 22–150 GSM, non-woven from 30–82 GSM, both OEKO-TEX Standard 100 certified, MOQ 1,000 metres per SKU.

If you are still unsure which type or GSM fits a specific garment in your current production, reach out with your outer fabric details and garment type — we will give you a clear recommendation before you place your order.

Link of related Articles

• Innovations in Woven Interlining: What’s New in Textile Industry Trends?
• Applications of Non-Woven Interlining in Fashion Industry | Key Insights
• The Benefits of Non-Woven Interlining for Cuffs and Collars

 

Shweta, a textile designer with a keen eye and deep knowledge of fabrics, translates her passion into unique designs. She loves to share her expertise and ignite a love for textiles in others. Dive into the world of fabrics with Shweta!